46
DUO
DOUBLE-ROTOR RAKE
DWUKARUZELOWA
OPERATOR’S MANUAL
e)
setting raking tines lower than 1 cm above the ground,
f)
too low raking and using rpm higher than 350 rpm which may cause:
- damage of the gearbox,
- bending of working arms,
g)
random events or others for which the warrantor is not responsible,
h)
driving tractor with aggregated rake through deep ditches,
i)
bending or breaking transmission connecting rod,
j)
using PTO shaft featuring parameters other than provided by the shaft's manufacturer, or length
not adjusted to operating tractor,
k)
running of the tractor together with the rake through deep holes,
wearing parts: intersecting axis gears and parts inside the gearboxes, bushings and
sliding elements, arms with tines, rubber-metal fenders, safety curtains, tires,
connective elements, cogs and gear pinion etc. These repairs may be done only at purchaserer’s
cost.
❑
The costs of technical assessment are borne by the Purchaser - if the Manufacturer determines that
the product being subject to claim is defect free and what is confirmed by a further expertise.
❑
The Manufacturer has the right to cancel the warranty in the following cases:
a)
interference to the interior of the rake, modifications to its mechanical design or unintentional
damages, bending parts of the machine etc.
b)
vast damage caused by accidents, running into obstacles or other occurrence, for which the
warrantor does not bear any responsibility,
c)
lack of required records in the warranty card or filling in the warranty card independently,
d)
use of the rake for any purpose other than provided in the operator's manual.
❑
Manufacturer can break the service agreement with immediate effect when the user does not pay
receivables under the agreement in a timely manner and the delay in payment is longer than 30 days
from maturity date. Breaking the service agreement by the Contractor for causes lying on the the
user side makes simultaneous termination of the warranty given for the particular machine.
❑
Manufacturer does not bear any compensation responsibility for the loss caused by the machine
breakdown during its operation.
NOTE:
Upon purchasing the machine, request your dealer to carefully complete the
warranty card with date and location of the purchase as well as the dealer stamp
and signature. Otherwise the warranty is invalid.
NOTE:
The warranty claim shall be considered if the following required data is
complete: address, date and place of purchase, rake type and invoice number.
NOTE:
When the warranty expires, repairs can be carried out for charge by the entitled
repair shops suggested by the dealer. The dealer is obliged to inform the
Purchaser on these.
NOTE:
The SaMASZ company constantly works on development of all of its machines
types and models. Therefore, there is always a possibility in change of form,
equipment and technology of the delivered machines. No claims can arise from
data, drawings and descriptions included herein as well as in the spare part list.
