03. Connecting Peripherals
System Installation
◀ 2 - 15 ▶
Receipt Printer
Error Status & Error Resolution
–
Error Resolution
Cutter Jam / Cutter Not Home
1. Pull the printer cover and open it.
2. In case the cover is not open completely, repeat to open and close the cover 2 or 3 times.
Then, the cutter takes a step backwards and you can open the cover normally.
3. If the cover opens completely, remove jammed paper and then close the cover.
HOME Contents Help Print Exit
?
Introduction
System Installation
Make sure of
installation area
Before connecting
peripherals
Connecting Peripherals
Connecting Serial Port Devices
such as Barcode Scanner
Connecting RJ-11 Cash Drawer
Connecting RJ-45 LAN Cable
Connecting USB Device
Connecting PS Module
Connecting Security
/ Scanner Module
Connecting Receipt Printer
Receipt Printer
Dismantle the Cover
for Customer Displays
Connecting DVR Card
Connecting AC Power
Cord to the Set Plug
Cable Management
System On / Off
System Use
System Expansion
& Dismantle
Appendix A
System Set-Up
Appendix B
System Structure
▶
▶
▶
▼
SPT-7000
