◀ A - 22 ▶
Setup Prompt Timeout
Bootup Num-Lock State
Full Screen LOGO Display
GateA20 Active
Option ROM Messages
You can use this item to set the number of seconds waiting
for setup activation key.
You can use this item to select the keyboard NumLock
State after the system has been switched on. This item allows you
to enable or disable Full Screen LOGO Show function.
UPON REQUEST
–
GA20 can be disabled using BIOS services.
ALWAYS
–
it doesn t allow disabling the GA20; this option is
useful when any RT code is executed above 1MB.
This item can set the display mode for Option ROM.
Interrupt 19 Capture
Boot Success Beep
UEFI Boot
Boot Option Priorities
Hard Disk Drive BBS Priorities
Interrupt 19 is the software interrupt that handles the boot disk function.
When this item is set to Enabled, it allows the Option ROMs to trap Interrupt 19.
When this item is set to Enabled,
BIOS will let user know boot success with beep.
This item enables or disables boot from the UEFI Devices.
Items in this sub-menu specify the boot device priority sequence from
the available devices. The number of device items that appears on
the screen depends on the number of devices installed in the system.
The BIOS will attempt to arrange the hard disk boot sequence automatically.
You can also change the booting sequence. The number of device items that
appears on the screen depends on the number of devices installed in the system.
05. Boot Menu
Appendix A. BIOS Set up
HOME LIST HELP PRINT END
?
e-Manual
SPT-3700
System Introduction
System Installation
System Utilization
System Expansion
Appendix A
BIOS set up
Understanding BIOS Set Up
Main Menu
Advanced Menu
Chipset Menu(Host Bridge)
Chipset Menu(South Bridge)
Boot Menu
Security Menu
Save & Exit Menu
Appendix B
System configuration
