◀ 4 - 20 ▶
Remove system back cover (refer to System Disassembly on page 4-4).
1.
Remove touch cable and LED cable after undoing fixed screws as the picture below.
2.
Remove LCD bracket and front display by undoing fixed screws.
3.
▶
The touch panel is easily damaged from dust or mishandling while disconnecting the LCD and touch panel.
Please use an authorized service center for touch panel removal and replacement.
Caution!
!
DALLAS Cable
LCD Bracket
Front Display
LED Cable
MSR Cable
Touch Cable
Main Interface Cable
PART 4. System Expansion
13. Touch Panel Removal
HOME LIST HELP PRINT END
?
e-Manual
SPT-3700
System Introduction
System Installation
System Utilization
System Expansion
System Disassembly
System Reassemble
Upgrading Memory Module
HDD Replacement
MSR Removal
Internal Speaker Removal
Touch MSR Board Removal
LED Board Removal
LPT Board Removal
Joint Harness Removal
I/O Extension Board Removal
Main Board Removal
Touch Panel Removal
LCD Panel Removal
Appendix A
BIOS Set up
Appendix B
System Configuration
