52
S Mode Programming
SPS-500 Program Manual v1.31
080-
089
Reserved
CURSOR DOWN
091
Use in REG Mode to cursor up to an item displayed in the transaction
area of the screen.
CURSOR UP
092
Use in REG Mode to cursor up to an item displayed in the transaction
area of the screen.
099-
100
Reserved
DESTINATION 1-10
101-
110
DESTINATION functions are subtotal functions to be used for selling
situations such as eat in, take out and drive thru. Touch the appropriate
DESTINATION key to record the amount of the transaction in the
destination key total on the financial report. Tax calculation can be
changed to accommodate different tax rules for drive thru sales.
111-
114
Reserved
MACRO PAUSE
115
Press the
MACRO PAUSE
key during macro programming to indicate
a pause in the macro. A macro will stop when it reaches the pause, and
then accept an operator key entry before continuing the macro sequence.
MACRO SET
116
Press the
MACRO SET
key to create a macro at any time without
going through the P-mode macro program.
MACRO #
117
Use to execute one of the forty possible macros by entering the macro
number and touching the
MACRO #
key.
MDSE RETURN
118
Touch the MDSE RETURN key to adjust items inside or outside of a
transaction.
MISC TEND 1-16
119-
134
Touch a MISC TEND key to finalize or tender sales paid by various
charges or other media. Tendering may or may not be allowed
depending upon function key programming. (Charge is the default
descriptor for MISC TEND #1)
MISC TEND #
135
Access any of the 16 possible miscellaneous tender functions by
entering the tender number (1-16) and touching the
MISC TEND #
key.
MODIFIER 1-10
136-
145
Preceding a PLU entry, a modifier key changes a digit of the PLU
number, causing a different PLU to be registered. Modifier keys can be
set to change any of the 14 PLU digit positions to any specified digit (0-
9).
#/NO SALE
147
Use to enter a non-adding memo number during a transaction (#
function) or use to open the cash drawer outside of a sale (no sale
function). Beginning at version 1.00s (Sept 12, 2013) capability to scan
a non-add number was added.
P/BAL
148
Enter an amount, and then touch the Manual Previous Balance (P/BAL)
key to use the simplest form of Charge Posting/Table Service. The
P/BAL key may be used any time within a transaction. Transactions
where the P/BAL key is used must be finalized with one of the STORE
CHECK keys.
