Sam4s SER 7000, Operation Manual, Page: 49 / 211

- 49 - SER-7000
FUNCTION KEY - DEFINITIONS
PRICE LEVEL 1 - 20
Press a price level key prior to a PLU entry to shift the price of a PLU to a different ‘
price set’
pre-
programmed to the PLU. Each product has the ability to sell at four different prices. The prices are not
fixed however at price levels 1 through to 4. The Price level can be allocated from any of the twenty to
provide detailed price reporting using the PLU by price level report (if set in memory allocation). The
norm for a bar is two prices normal and special offer price this requires no special programming.
The terminal however can be programmed to used up to twenty price bands. For example we could
have some PLUs using prices 1 – 4 representing sizes and some PLUs using prices 6 – 10. This would
then representing different products types sold at different sizes; pressing the appropriate price key will
sell the correct size. Then using the price level report, the analysis would show the total per product a
breakdown of the price sales per product and overall sales total for all products per price level
PRINT
This key is used to temporarily change the remote printer settings of a PLU allowing printing to the
programmed printer route allocated to this key. It is required that a product to print has KP Print set to Y
to allow the item to be printed.
PRINT CHECK
Used during any open check or after finalisation to print a detailed bill for check tracking files 1 – 4, The
bill can if required be programmed to print automatically to the printer defined by this key.
PRINT HOLD
Used to remove the HOLD designation from an item or order, so that the items and their instructions are
now sent to the kitchen printer/KVS at finalisation
PROMO
Press the PROMO key to zero the price (the item remains). This can be used in 2 for 1 promotions etc.
A promo count and value of discount given is shown on the financial reports.
PRINT SCREEN
Press the print screen key to print a copy of the current screen on the designated receipt printer
RECEIPT ON /OFF
This is used to turn the receipt off or on. The receipt can be programmed using system flags to be a
continuous receipt with the ability to issue a post receipt (default setting) or to print only when the post
receipt key is pressed.