Sam4s SER 7000, Operation Manual, Page: 13 / 211

- 13 - SER-7000
DISPLAY MESSAGES
MEMORY FULL
Memory is full, whilst attempting a register sale.
NEGATIVE
This sale has gone negative. Negative sales are programmed as not allowed.
NO CHECK #
This message appears when the system cannot find the guest check number.
NO DATA
The PLU code accessed does not exist, shown in program mode during stock entry etc. It is
recommended the PLU is programmed.
NO DRAWER!
The employee currently signed on is not assigned to a drawer, and is not allowed to perform cash sales,
or the drawer is no longer attached and is required in order to continue.
NO MANUAL ENTRY
Manual entry is not allowed (scale function).
NO PAPER
Slip printer is out of paper, appears when printing to a loose-leaf printer.
NO PLU!
The number entered is not a valid PLU. This message will also appear if a PLU number “built” using
modifier keys recalls an invalid PLU number.
NONADD# REQUIRED
This operation requires the entry of a Non-Add number to fulfill the compulsory requirements.
NOT DISCOUNTABLE
The preceding entry is not discountable, the product is not available for discounting.
NOT PROGRAMMED!
This key has not been programmed
NOT READY!
Remote printer is not ready for printing tasks, check the printer status.
NOT ZERO
Displayed when trying to delete a PLU that still has sales counts and stock amounts. The PLU must
first be reset and cleared from all Z Mode reports.
OFF LINE!
IRC communications have gone off line, check the cable network.
OPEN DRAWER
The register has been programmed not to operate with the cash drawer open, close the cash drawer.
P/BAL REQUIRED!
This register has been programmed to require a previous balance entry.