SAM300 Reference Manual v1.0
Stores
15
Field Name
Required
/Optional
Description/Instructions
Name
Display
Only
The store name displays.
Store#
O
Enter up to a 6-digit number that is the same number that
you used when you programmed the store# at the register.
If store numbers do not match, you will not be able to
communicate with the register.
From/To
IRC Range
R
Enter the IRC range of registers from 1-8 If the register is
standalone, use
from
1
to
1
.
Connection
Type
R
Choose
Direct
,
Dial Out Modem
, or
Internet
Modem
Phone#
O
Enter the Phone number preceded by the letter
T
or
P
only
if you intend to communicate with the register by modem.
The
T
is for TONE and the
P
is for PULSE. If you
communicate direct, leave this field blank.
Modem Time
Out Value
R
Unless otherwise indicated, the default value of 99 will be
entered automatically when the store is created.
Modem Initial
String
O
Ignore this field unless attempting to use a modem other
than the recommended US Robotics modem. (This field is
to allow you to enter any initialization required for your
modem for polling or communications. Do not add the
command prefix “AT” in this string. Do not put into this
string any E, Q or V values. The software automatically
handles these values.)
IP Address or
IP Name
O
If connection is Internet, enter IP address or IP name.
Port# That
ECR Listens
On
O
If connection is Internet, enter the port the router listens
on. (Default is 5000)
Use PC COM
Port# (1-32)
R
Enter the PC serial port (COM1- COM32) that you are
using for communications.
BAUD Rate
R
Select the data transmission rate that matches the BAUD
setting in the “Define Serial Port Parameters” S-Mode
program at the SPS-300.
Download
PLUs After
Polling
O
Enter Y if you wish to download changed PLUs in a
polling session. When the session is finished polling, the
program will download any changed PLUs.
Deactivate
This Store
O
Select the
Deactivate This Store
check box if you wish the
store to be inactive.
Download
Programs Only
to Register #1
O
If checked, program downloads will communicate only to
the SPS-300 in an IRC configuration that is connecting to
SAM300. If not checked, programs will be downloaded to
all SPS-300’s in an IRC network.
Keyboard Type
R
Select Flat keyboard or Raised 21 key depending upon
model.
