172
Program Mode Programming
SAM4s ER-655II v1.2
CHECK # Key Program Notes
Option Entry
Description
DESC Alpha
numeric
12 character
You can program a descriptor. The default descriptor is
CHKTRACK.
KEY DISABLE
Y or N
Select
Y
to disable this function.
COMPULSORY FOR
ALL SALES
Y or N
Select
Y
you must begin a new, or recall an existing tracking
number before registering items.
OPENING CLERK
HAS EXCLUSIVE
ACCESS
Y or N
If
Y
, the clerk that begins a tracking number is the only clerk who
can recall a check. If
N
, any clerk can recall any check.
PRINT ON RECEIPT
Y or N
If
N
, the check track number and balance will not print on the
receipt.
PRINT ON REMOTE
Y or N
If
N
, the check track number and balance will not print on the
remote.
ALLOW ONLY ONE
CHK PER TABLE
Y or N
If Y, you can begin only one check with the same table #.
CHECK #
ASSIGNED BY
REGISTER
Y or N
If
Y
, press the
CHECK. #
key to automatically assign the next
sequential check. Check numbers will begin with #1 and continue
until the open check report is reset, at which point the check number
will be reset and start at #1 again.
DRIVE THRU
FEATURE
ENABLED
Y or N
If you wish to implement a drive thru recall key, this setting
changes the function of the
PBAL
key to that of a recall key. Press
the
PBAL
key directly to automatically recall the open check with
the lowest tracking number
LENGTH OF
CHECK (0-9)
Y or N
Set the length of check in number of digits. For example, if 4, then
checks must be used in the range from 1000, to 9999. This setting
applies only to check numbers input by the operator, not to check
numbers assigned by the register.
SCAN CHECK #
Y or N
Choose
Y
to allow the check number to be input by a scanner (must
be nine digits or less).
Summary of Contents for ER-655II
Page 10: ...vi Contents SAM4s ER 655II v1 2...
Page 100: ...90 X Mode SAM4s ER 655II v1 2...
