124
•
Program Mode Programming
Sam4S 3xx, 4xx, 52xx Electronic Cash Register AU
System Option Programming
Refer to the “System Option Table” to review the system options. Read each option carefully to determine if
you wish to make any changes. Default value has been highlighted in
bold
print.
NOTE: Because after clearing memory all options settings are automatically set to 0, and because
your most likely option selections require a status setting of 0, you do not need to program this
section unless you wish to change the default status.
Programming a System Option:
1.
Turn the control lock to the
P
position.
2.
Enter
3 0
, press the
SBTL
key.
3.
Enter a system option address, press the
X/TIME
key.
4.
Enter the number representing the status you have selected, or if there is more than
one decision to be made in an address, add the values representing your choices for
each decision and enter the sum. Press the
SBTL
key.
5.
Repeat from step 3 for each system option you wish to change.
6.
Press the
CASH
key to end system option programming.
System Option Flowchart
SB TL
X/T IME
Status
CASH
Repeat for each
System Option
Option #
SBT L
0
3
Ú
Default values have been highlighted in
bold
Summary of Contents for ER-380
Page 42: ......
Page 96: ......
Page 214: ...206 Sample Reports Sam4S 3xx 4xx 52xx Electronic Cash Register AU Rev 2 05 Jun 09...
