114
P-Mode Programming
ER 380/380M Electronic Cash Register v2.9
Programming the Macro Name
Up to ten function locations may be designated as Macro keys. You may wish to program a name for a
macro. For example if a macro executes a series of commands to produce daily reports, you can
program the descriptor “DAILY”, so the macro can easily be identified. Macro names can also be
helpful when looking at keyboard layout information with the PC communication utility.
1.
Turn the control lock to the
P
position.
2.
To begin the program, enter
7
1 1
, press the
SBTL
key.
3.
Enter the number of the Macro you wish to program (1-10); press the
X/TIME
key.
4.
Enter up to 12 three-character codes and press the X/TIME key (see “Descriptor Code
Chart” on page 78.)
5.
Press the
CASH
key to finalize the program.
7
1
1
SBTL
X/TIME
CASH
_ _ _
SBTL
_ _ _ _ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _ _ _ _ _ _ _
Summary of Contents for ER-380
