ER 380/380M Electronic Cash Register v2.9
P-Mode Programming
113
Miscellaneous Programming
Macro Key Sequence Programming
Macros are special function keys that are used to execute a sequence of key depressions. For example,
a macro might be used to execute a string of reports or to automatically tender a preset amount. Up to
ten different macros may be placed on the keyboard. (See "Function Key Assignment Programming”
on page 61 to place macros on the keyboard.)
To Program a Macro
1.
Turn the control lock to the
P
position.
2.
To begin the program, enter
1 5 0 0
, press the
SBTL
key.
3.
Press the
Macro
key that you wish to program.
4.
Optionally, you can turn the key lock to the position where you wish the macro to set the
register. For example, if wish the macro to set the key lock to
X
to run a report, turn the
key lock to
X
. When used in the
REG
position, the macro will set the register to
X
and
run the report.
5.
Press up to 50 keystrokes that you wish the macro to execute.
6.
Return the key lock to the P position and press the macro key to finalize.
7.
Repeat from step 3 to program additional macros. Press the
CASH
key to finalize the
program.
To Remove a Macro
If you wish to change a macro sequence change the function key assignment of the key to ‘
Inactive
’,
and then reassign the macro function and reprogram the keystrokes as shown above. (See “Function
Key Assignment Programming” on page 61.)
5
0
0
SBTL
1
MACRO
CASH
Type up to 50
keystrokes
MACRO
Summary of Contents for ER-380
