Sirius 800 Series User Manual
Output Modules
Modules No Longer Supplied With New Systems C.4
Iss 5 Rev 7
Page 335
© 2017 SAM
C.4.3 5925 Sirius 800 Video AHP Output Module
The 5925 Sirius 800 video AHP output module with audio embedder and re-clocking has 24
video output channels and can handle SD, DVB-ASI and HD signals up to 3Gb/s.
The audio embedder synchronously re-inserts up to 16 mono audio channels per video output
channel (16 for SD and HD) giving up to 768 audio channels per 5925 output module.
The 5925 AHP video output module contains a powerful processing engine that can
manipulate the individual audio channels passing through it (see Appendix C.4.3.1). Audio
processing is a licensed feature which must be purchased for each module it is needed on,
see section 3.7.1 for licensing details.
The 5925 output module synchronizes routed audio channels (by drop/repeat) to re-time to
the video signal for embedding. All VANC (Vertical Ancillary) data and all non-audio HANC
(Horizontal Ancillary) data is removed.
Important:
•
The 5925 Sirius 800 video AHP output module was supplied with earlier Sirius 800
router systems and is shown here for users that already have them fitted.
•
The 5925 Sirius 800 video AHP output module can be supplied as a replacement
for these earlier systems if required.
The 5925 module heat sink can get very hot during normal operation. When removing the
5925 module from a router do not touch the heat sink until it has had time to cool down.
Figure 213 5925 Sirius 800 Video AHP Output Module
Note:
•
Jumpers and Headers are present on the video output module and these are for
SAM Use Only.
•
In normal operation no jumper links or headers are fitted.
Connectors
to the
Motherboard
Connectors
to the 1294,
1363, 1302
or 1364 Rear
Panels
Fugue LED
Firmware/Licensing
SD/SDHC Card
(see the Sirius 800
Maintenance &
Upgrade manual
for details)
LEDs
Eight Diagnostic
LEDs - SAM Use
Only
