IQFDA31
Operation Using the RollCall Control Panel
Issue 1 Rev 1
Page 23
© 2016 SAM
5.7 Setup
The Setup screen display basic information about the module, such as the serial number and
software versions. Use the functions on the screen to restart the module or return all settings
to their factory or default settings.
•
Product:
The name of the module.
•
Software Version:
The currently installed software version number.
•
Serial No:
The module serial number.
•
Build:
The factory build number. This number identifies all parameters of the module.
•
KOS:
The operating system version number.
•
PCB:
The Printed Circuit Board revision number.
•
Rear Type:
The rear panel type.
•
Licensed Options:
The installed licensed options.
5.7.1 Default Settings
The
Default Settings
button enables module settings to be reset to their factory defaults,
leaving user memories intact.
5.7.2 Factory Defaults
The
Factory Defaults
button enables the module settings to be reset to their factory defaults.
5.7.3 Restart
The
Restart
button enables the module to be rebooted, simulating a power-up/power-down
cycle.
5.7.4 Input Name
These are the input names displayed in logging.
To change the name of Input 1 or Input 2, type the name in the text field and click
S
. To return
the name to its factory default, click
P
.
Note:
Resetting the module to its factory defaults also clears all the saved memory settings.
