IQDMX30/IQDMX31
Controlling the IQDMX30/31 from the RollCall Control Panel
Issue 2 Rev 5
Page 37
© 2015 SAM
INPUT_N_STATE=
Displays the current input state. Valid values are:
•
OK
•
WARN:Mismatch
•
FAIL:Lost
Note:
WARN:Mismatch indicates that the input and output
standards are not the same.
INPUT_N_STANDARD=
This displays the current input signal standard. For example,
1080/29i.
If the input standard is not recognized or supported the field
will display: WARN:Unknown
INPUT_N_TYPE=
This displays the type of input as specified by the module’s
configuration. Valid values are 3G / HD /SD SDI.
INPUT_N_IDENT=
Display the input ID.
INPUT_N_SDI_ERRS=
Displays SDI errors. Valid values are:
•
OK
•
WARN
INPUT_N_SDI_ANC_ERRS=
Displays ANC errors. Valid values are:
•
OK
•
WARN
INPUT_1_EMBEDDED_AUDIO_1_STATE=
to
INPUT_1_EMBEDDED_AUDIO_8_STATE=
-------------------------------------
INPUT_2_EMBEDDED_AUDIO_1_STATE=
to
INPUT_2_EMBEDDED_AUDIO_8_STATE=
These fields display the current embedded input audio state.
Valid values are:
•
OK:PCM
•
OK:Data
•
OK:DolbyE
•
WARN:No Input
•
FAIL:Lost
OUTPUT_
N
_TYPE=
3G / HD / SD SDI
OUTPUT_
N
_STATE=
•
OK
•
WARN:Pattern
•
WARN:Black
•
WARN:Freeze
OUTPUT_
N
_STANDARD=
Displays the current output video standard.
OUTPUT_
N
_CAPTION=
•
OK:Off
•
WARN:On
OUTPUT_
N
=
Displays the relevant input source for the output video.
Log Field
Description
