IQDMX30/IQDMX31
Controlling the IQDMX30/31 from the RollCall Control Panel
Issue 2 Rev 5
Page 17
© 2015 SAM
6.2 Video
The
Video
screen enables you to specify the settings for the selected serial data input:
•
Valid Input standards.
•
The default output standard.
•
Any required ancillary blanking.
•
Freeze options and apply a manual freeze to the output image.
•
The default output.
6.2.1 Video Input Select
Use this control to select either Input 1 (SER IN 1) or Input 2 (SER IN 2).
6.2.2 Audio Input Select
The
Audio Input Select
control selects audio from either Input 1 or Input 2 to be processed
by the module. If Follow Video is selected, the audio input will automatically match the video
input selected.
6.2.3 Valid Input Standards
The
Valid Input Standards
check boxes specify the video input standards that the module will
accept. The module will automatically detect the standard of the received input and block any
signal that does not comply with these selected video formats.
By default, all input standards are selected.
