OPERATION
Before Using the Pump
1.
Check all system fittings and connections to be sure they are tight and leak free.
2.
Check oil level in reservoir before operating pump.
CAUTION
NEVER add extensions to pump handle. Extensions cause
unstable pump operation.
WARNING
In certain situations the pump handle can "kick back". Always
keep your body to the side of the pump, away from the line of
force of the handle.
NOTE:
To reduce handle effort at high pressure, take short strokes. Maximum leverage
is obtained in the last 5 degrees of stroke.
Single-Acting Applications with Release Valve
1.
Close release valve by turning clockwise. as shown in Figure 2.
CAUTION
Close release valve finger tight ONLY. Using tools on release
valve can damage it and cause the pump to malfunction.
2.
Operate pump handle to deliver hydraulic power to system. Pressure will be
maintained until release valve is opened.
3.
Open release valve (turn counter-clockwise) to release pressure, allowing oil to flow
back to the reservoir.
Figure 2
3