Sam Cook Masterchef Line Executive SOUS VIDE PSC-20, User Manual

Page: 20 / 24

EN
20
TROUBLESHOOTING
Problem Cause Soluti on
Grinding sound during work. Loose mixer housing. Fix the housing properly.
Sound of fl owing water. The mixer swirls water. Top up the pan with water and/or change the
distributi on of the bags in the container.
Sound of bubbling water. Too litt le water. Add water to the pan.
Food is fl oati ng on the water. Broken/unti ght bag with food. Stop the cooking process. Wash the pan and the
cooker.
The cooker won’t start. No power. Check the mains connecti on.
The cooker displays error “EE1” – no water in the
pan.
Water level decreased due to vapouring and whirls. Add water to the pan. Resume the cooking process.
CLEANING AND MAINTENANCE
1. Unplug the cooker from the mains and wait
for it to cool before starti ng cleaning.
2. Wipe the appliance housing ① with a damp
cloth and then dry thoroughly. Do not
immerse the appliance’s housing in water.
3. Remove the housing from the heati ng
unit ⑥ and the sti rrer ⑦ . Wash these parts
in water with detergent, rinse and dry them.
They can also be cleaned in the dishwasher.
4. Gently clean the heati ng element, sti rrer
and water level sensor ti ps with water with
detergent using a soft brush, then rinse
them and dry. You can access the heati ng
element, sti rrer and water level sensors
aft er removing the heater’s cover ⑥ .
5. Periodically descale the appliance. Prepare
the descaling agent so that the liquid level
reaches the MAX mark on the device aft er
its mounted on the pan’s wall. Set the
temperature on the appliance to 40 °C and
switch on the device for approx. 2 hours
(possibly set other parameters according
to the descaling agent’s manufacturer’s
recommendati ons). Rinse the parts and dry
them thoroughly aft er descaling.
INSTALLING/REMOVING THE HEATING
ELEMENT AND STIRRER’S HOUSINGS
To remove the heater’s housing ⑥ and the
sti rrer’s housing ⑦ , do the following:
1. Make sure that the appliance is unplugged
and cooled down.
2. With one hand hold the appliance’s
housing ① and the heater’s housing ⑥
with the other and then turn it so that the
mark on the heater is pointed to the open
padlock symbol
fi g. 2
.
3. Aft er turning, push the heater’s housing
down to get free access to the heater.
4. With the heater’s housing ⑥ removed,
take off the sti rrer’s housing ⑦ by turning
it gently in a clockwise directi on
fi g. 3
.
To install the elements, gently turn in the
opposite directi on aft er inserti ng it into the
heater’s housing. Note that one of the tabs
on the sti rrer’s housing is clearly longer
fi g. 2 fi g. 3