Sam Cook 1197829, User Manual

Page: 24 / 34

EN
24
MIXING ATTACHMENT
(BUTTERFLY WHISK)
The mixing att achment (butt erfl y whisk) ⑭
can be used for whisking light creams, doughs
and egg whites. It is att ached to the cutt er
assembly. Its design prevents the food being
whisked from breaking down completely.
The att achment design enables quick installa-
ti on.
CUTTER GUARD (MIXING PADDLE)
The cutt er guard (mixing paddle) ⑬ can be
used when mixing the food is more important
than chopping it.
BASKET
The basket ⑮ can be used for cooking loose
food items (such as rice or groats) and food
that requires no sti rring. The contents
being cooked can be quickly fi ltered from
the stock (broth, bouillon). It can be used
for steam-cooking small items as well.
STEAMING CONTAINER
The steaming container ⑩ combined with the
tray ⑪ and cover ⑫ turn the all-in-one robot
into a steam cooker. Thanks to the design
of the container, the sauce from the food
being cooked stays in the jug and can be used
for other purposes aft erwards.
PREPARING FOR USE --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Remove the appliance from the box.
Remove all packaging cardboard and fi lm
pieces from the appliance parts.
2. Thoroughly clean and dry the appliance,
especially all appliance parts with direct
contact with food products. Never immerse
the housing in water.
3. Place the appliance on a level, stable
and smooth surface.
4. The appliance has a safety lock: the appli-
ance will only turn on if the jug ④ and jug
cover ⑧ have been installed properly.
INSTALLING/UNINSTALLING
THE CUTTER ASSEMBLY
1. Put the gasket ⑥ on the cutt er assembly ⑦
and make sure it fi ts ti ghtly against the
appropriate edge.
2. Insert the cutt er assembly ⑦ into the
jug ④ , so that its sprocket wheel fi ts
through the hole in the jug bott om
fi g. 1
.
3. Put the cutt er lock component ⑤ onto the
cutt er assembly ⑦ sprocket wheel, so that
the three protrusions of the lock compo-
nent ⑤ fi t the corresponding slots in the
protruding fragment of the cutt er ⑦ . Next,
gently rotate the lock component clockwise
unti l the locking mechanism engages.
4. To remove the cutt er assembly perform the
installati on steps in reverse order.
CAUTION! The blades are very sharp. Handle
with care! Always hold the blade by its upper
secti on!
CAUTION! The gasket must fi t ti ghtly against
the cutt er assembly. Failure to use the gasket
may result in leakage of the product being
chopped or cooked and damage the appli-
ance.
CAUTION! Make sure the cutt er has been
properly installed before starti ng the appli-
ance.
fi g. 1