![background image](http://html2.mh-extra.com/html/salvis/visionpro-series/visionpro-series_operating-instructions-manual_3654021014.webp)
en
14
4.1
Emptying the pan
Before emptying
CAUTION
The tank can be damaged by
overheating. For this reason, always switch the
appliance off before draining it.
.
Close water valve by turning clockwise.
.
Turn off appliance and let it cool down.
.
Remove containers from the tank.
Opening the drain tap
CAUTION.
There is a risk of scalding
from the hot water as the tank is drained.
.
Open the drain tap.
D
The water drains away.
4.2
Cleaning the appliance
D
Remove limescale in the tank with a vinegar solution or a limescale dissolving detergent.
Take note of the cleaning instructions provided by the detergent manufacturer when using
limescale dissolving detergents.
.
Cleaning:
−
Fill the tank with a vinegar solution so that all the limescale is covered.
−
Boil the vinegar solution briefly and allow to act for about 15 to 30 minutes depending on
the limescale deposits.
−
Drain the cleaning vinegar into a storage container. You can use the vinegar solution
repeatedly to remove limescale.
−
Clean the tank and the trivet.
.
Empty and clean the containers.
.
Rinse the cleaned surfaces thoroughly with water and rub them dry.
.
Clean stainless steel surfaces with grease-cutting cleaning products or special stainless
steel cleaners.
.
Close the drain tap.
Drain cock
(outlet into
waste)
Close
Open
Outlet to the waste
connection
Lever for water
valve (manual filling
version)