20
The following parameters change in the energy saving mode „ECO“:
1. Evaporator ventilating fan works in cycles only.
2. Automatic defrost starts every 12 hours only instead of every
8 hours.
3. The rated value is increased according to pre-set factory values
(from +4
°
C auf +6
°
C factory set)
Rated value in ECO-mode can be changed by pressing button and
or .
In periods of few or none door openings (closing day, at night, holidays) energy
consumption may be reduced considerably by using this mode.
3.2 Defrosting
All refrigerated counters are fitted with a fully automatic defrost regulation. The
parameters for defrost intervals, defrost times etc. are factory pre-set to the
optimum values. Parameters should only be changed only exceptionally
refrigeration/electric specialist. Parameter lists are available from the
manufacturer.
During defrosting “DEF” lights up on the display. This notifies the defrosting phase
and lights out again when defrosting process has been finished.
All refrigerated counters with built-in cooling system evaporate the condensate
automatically by using hot gas.
All refrigerated counters for connection to a central cooling system drain the
condensate via given siphon outlets into the building lines (see hereto picture 2
on page 22).
Attention!
Do not pour any cleaning water, other liquids, food particles or similar into
the condensate channel. This would affect the fully automatic defrost and
evaporation function of your refrigerated counter. Check regularly if the
condensation water flows unobstructed through the drainpipe (see picture 4
on page 22).
GB
Summary of Contents for KKM Series
Page 11: ...11 D ...
Page 22: ...22 GB ...
Page 37: ...37 7 SCHALTPLÄNE WIRING DIAGRAMS SCHÉMAS ÉLECTRIQUES ...
Page 38: ...38 ...