background image

7

Equipment covered

by this warranty:

All Salvajor commercial disposers, disposer 

systems, collector systems, accessories and parts.

Length of this warranty:

Parts and labor for 12 months from date of 

installation or 15 months from date of shipment 

from the factory, whichever expires first, on 

all disposers and systems. Accessories 

manufactured by Salvajor are covered for 

parts and labor when they are sold as part 

of the original disposer assembly or system 

package. Accessories not manufactured by 

Salvajor are covered for parts only. Accessories 

and parts sold separately are covered for parts 

and/or workmanship for 90 days from date of 

installation.

Warranty coverage:

Providing the equipment is unaltered, has 

been properly installed, maintained and 

operated, Salvajor will repair or replace at 

no cost, defective parts due to material or 

workmanship, if such service is performed 

by a Salvajor Authorized Service Center. 

Parts wear is not considered a defect.

Conditions not covered

by this warranty:

Faulty or improper electrical installations, 

faulty or improper plumbing installations, 

disposer jammed by foreign object, tripped 

overload (re-set button), clogged drains, 

pump jams, clogged solenoid valves, blown 

fuses, abuse, accidental damage, unit 

improperly sized for application according 

to factory recommendations.
This warranty is limited to the continental 

United States, Hawaii and Canada.

Salvajor Warranty

ONE YEAR PARTS AND LABOR

For your nearest

Factory Authorized Service Center:

Call 1- 888 - 725 - 8256

or 816 -363 -1030

Fax 1- 800 - 832 - 9373

or 816 -363 -4914

www.salvajor.com

[email protected]

Summary of Contents for Trough Collector S419









Reviews: