11
9)
Fan speed setting
Press
FAN
button to change the fan speed, only low speed available for dehumidification mode.
10)
On/Off control
Press
to start or stop the air conditioner.
11)
Networking control (only master unit wall pad can control slave units on the network)
Press
NET
button to enter into networking control mode. Unit area blinking indicates the slave unit under
control. Press
TI ME
or
TI ME
to select the desired slave unit. Units that are offline will be skipped
automatically.
Press
NET
button again to exit networking control mode.
Parameters that can be controlled are on/off, timer weekly program, set temperature, mode, fan speed, swing and
sleep, operation methods are the same as above.
Hold down
SWI N
G
and
FRESH
buttons for 3 sec to enter into Global control mode,
lights up. Repeat the
same to exit global control mode. In global control mode, the setting of master unit will broadcast to all the slave
units.
