10
successfully. Press
TI ME
or
TI ME
button to change the on timer setting.
3.
Press
TI MER
button again to enter into off timer programming mode. Press
DAY
button to select
the required day of week. Master unit will then retrieve the setting from the selected slave unit and
timer display area will show ‘rEAd’. The off timer setting will be shown upon reading the data
successfully. Press
TI ME
or
TI ME
button to change the off timer setting.
4.
Upon completion of changing timer settings of the selected day, press
TI MER
button again to exit
timer programming mode. The settings will then update to the selected slave unit. The next day of the
week settings can be done only upon completion of sending data to the salve unit. (Repeat steps 1~4
if setting is required for the next day of week).
5.
In Global control mode:
¾
Pressing master
CANCEL
button for 3sec will cancel all the timer settings in all slave units.
¾
Timer settings will broadcast to all slave units.
Clock synchronization by master unit is as follow:
1.
Press
TI ME
and
TI ME
buttons for 3sec to activate clock synchronization to all salve units.
2.
Master wall pad responses with a beeping sound.
4)
Key lock
In order to prevent unauthorized access to the system setting, a key lock function is provided to prevent mischief.
Hold down
and
for 3 sec to activate key lock,
symbol lights up. Repeat the same to exit key
lock. Only
button is applicable in key lock mode.
5)
Swing
Press
SWI N
G
to activate or deactivate swing function.
6)
Sleep
Press
SLEEP
button to activate or deactivate sleep setting. Sleep is valid in cool or heat mode only.
7)
Temperature setting
Press
or
to enter into temperature setting mode, temperature display area blinks the current set
temperature. Press the above button to adjust the set temperature.
8)
Mode setting
Press
MODE
button to change the operation mode.
