Salutron SRT5000, Instruction Manual

Page: 11 / 16

11
5.5 Calibration
We advise you to run a calibration from time to time in order
to ensure stable accuracy. The calibration should be done
using the roughness standard included in the delivery. To
enter calibration mode, the tester has to be turned off. Turn
the tester on by pressing the start button at the top
simultaneously with
.
The tester will start in calibration
mode as indicated below:
Using the arrow keys adjust the starting value to the value
shown on the roughness standard.
Put the instrument on the scribed line area of the standard
and press the start button.
In order to leave calibration mode, the gauge has to be
turned off.
The user can perform a test measurement on the