Technical Data
Model
RR868
Transmitter power supply
230 V AC
Receiver power supply
230 V AC
Max receiver current
5 (3) A
Receiver output signal
230 V AC
Communication
Wireless, 868 MHz
Transmitter and receiver
dimensions [mm]
45 x 45 x 20
Dimensions of the transmitter
and receiver housing [mm]
84 x 84 x 28
Signal range in the open space
approx. 100 meters
Range within the building
35 meters (depending on the
internal building structure)
Housing assembly
RR868 includes 2 housing cases - for the receiver and for the transmitter.
Devices assembly is shown on the pictures below:
Press the button 3 times (very quickly, within 1 second).
Pairing devices
1 min
1
2
3
4
5
Connect the receiver and the transmitter to 230V AC power supply.
LED diodes will flash
orange
on both devices.
The transmitter stays in the pairing mode for one minute (LED diode
flashes
orange
). Receiver confirms pairing through
green
LED diode,
then diode turns
red
.
When the transmitter exits the pairing mode, it sends a signal to
the receiver. LED diodes on both devices are
green
now. The devices
are ready for work.
3x
3x
Note:
Devices are already paired!
Transmitter
Receiver
The transmitter should be connected in parallel to the lighting (bulb)
according to the wiring diagram below. Connect the circulating pump to
the receiver - “SL” and “N” contacts.
Connect receiver to the 230V power supply - “L” and “N” contacts. Turning
ON the lighting turns ON the transmitter and sends signal to the receiver.
The receiver gives 230V voltage on the “SL” contact and the circulating
pump is turning ON. Turning OFF the lighting turns OFF the transmitter.
Receiver goes back to the starting position and circulation pump is
turning OFF.
Connect the transmitter and pump relay of the wiring centre according
to wiring diagram below. Connect pump to the receiver - “SL” and “N”
contacts.
Connect receiver to 230V power supply - “L” and “N” contacts.
Turning ON the pump relay in the wiring centre will activate the
transmitter which will send a signal to the receiver. The receiver will turn
ON a pump.
Turning OFF the pump relay of the wiring centre turns OFF the transmitter.
Receiver goes back to the starting position and pump is turning OFF.
4. Wireless switching the circulation pump via light switch
5. Wireless connection of the wiring centre and circulation pump
L
N
L
N
PE
Transmitter
RR868
L N
Receiver
RR868
SL N L E E
Light switch
N
L
Power
Pump
L
N
Wiring centre
Transmitter
RR868
L N
L
N
PE
SL N L E E
Receiver
RR868
NOTES:
