CABLE CONNECTIONS
The PL07 does not use conventional screw terminals for wiring connections, but
uses cage clamp terminals. The cage clamp terminals are spring loaded and
provide a very quick and secure method of making all the electrical connections
to the module.
Please take the following steps to make the wiring connections to the PL07:
1. Prepare the cable ends:
• Strip outer sheath to a distance
of 110mm
• Strip 10mm from the ends of
each conductor sheath
It is very important that these
dimensions are followed to ensure
correct connection to the module.
2. Insert the cable into the cable grip:
3. Route the conductors through the wire guides:
PL07 INSTRUCTION MANUAL
7
110
10
mm
!
Salus PL07 Manual Ver007.qxd:Layout 1 10/9/10 10:03