Salus iT500, Instruction Manual

Page: 2 / 74

iT500 User Reference Manual
2
PRODUCT COMPLIANCE
This product complies with the essential requirements of the following EC Directives:
• Electro-Magnetic Compatibility Directive 2004/108/EC
• Low Voltage Directive 2006/95/EEC
• EC Marking directive 93/68/EEC
SAFETY INFORMATION
These instructions are applicable to the Salus Controls model stated on the front cover of this manual only,
and must not be used with any other make or model.
These instructions are intended to apply in the United Kingdom only, and should be followed along with any
other statutory obligations - if you are in any doubt, please contact the Salus Controls technical helpline.
This accessory must be fitted by a Competent person, and installation must comply with the guidance
provided in the current editions of BS7671 (IEE Wiring Regulations) and Part ‘P’ of the Building Regulations.
Failure to comply with the requirements of these publications could lead to prosecution. Always isolate the
AC Mains supply before opening or removing the unit from the wall or wall box.
Please leave these instructions with the end user where they should be kept in a safe place for future
reference.
PLEASE READ THIS INSTRUCTION MANUAL BEFORE USING THE EQUIPMENT.
THIS INSTRUCTION MANUAL MUST BE RETAINED FOR FUTURE REFERENCE.