6
Step 3
Step 4
Turn the handlebars with the heart rate
sensors to face you then attach the
handlebars (4) to the front support pole
(5). Lift the metal flap (29), centre the
handlebars in the space provided, close the
flap over the handlebars and lock in place
with the handlebar safety lock (3) – secure
tightly.
Insert batteries and check the console
display is on.
Take the console holder (2) in your hand
and connect the wire from the console to
the wire inside the front support pole (5).
Feed the wires through the support pole to
hide them.
Slide the console onto the console holder
(2) and connect the handlebar wires to the
console (1).
Step 5
Attach the saddle (13) to the horizontal
saddle bar (27) with the four sets of nuts
(15) and washers (14) provided. Secure
tightly with spanner.
Remove the horizontal saddle safety lock
(29) from the horizontal saddle bar (27).
Attach the saddle (13) to the horizontal
saddle bar (27). Slide it into the horizontal
support bar (28), adjust to suit your height
and tighten with the horizontal saddle
safety lock (29).
Place the concertina cover (16) over the
saddle support pole (20).
