6. GENERAL FUNCTIONING OF THE CONTROL PANEL
6.1
General functioning
32
THIS SCREEN IS DISPLAYED ONLY IF THE MAINS
SUPPLY WAITING FUNCTION IS ENABLED
IN THE SETUP MENU. TO EXCLUDE THE
WAITING TIME PRESS
RESET
THE OPERATION SCREENS RELATING TO THE CHOSEN
APPLICATION ARE DISPLAYED BELOW
PRESSURE BOOSTER = SEE CHAPTER 6.2
CLEAN WATER = SEE CHAPTER 6.3
SEWAGE = SEE CHAPTER 6.4
4-20mA bar = SEE CHAPTER 6.5
4-20mA meters = SEE CHAPTER 6.6
IT IS USED TO START THE MOTORS MANUALLY
ONLY IN STABLE MANUAL
BUTTON MODE
THIS SCREEN IS DISPLAYED WHEN
THE MINIMUM PROBE IS DISCOVERED
THIS SCREEN IS DISPLAYED WHEN THE
MINIMUM PROBE IS COVERED AND
THE MAXIMUM PROBE IS DISCOVERED
AFTER THE LACK OF WATER
It is used to scroll through the pages
Pressed in MOTOR STOP status it starts the motor
in manual mode
Pressed it starts the motor in automatic mode
Pressed the motor goes in STOP function
Pressed in case of an alarm it resets it
THE FOLLOWING SCREEN DISPLAYS:
- MEASURED VOLTAGE
- ABSORBED CURRENT OF THE MOTORS
- OPERATING HOURS OF THE MOTORS
SETUP PREMI
PAGE + MAN 10s
IGNITION
CONTROL PANEL
ON
A
400 V
13.2
13.2 A
13.2 A
ATTESA RETE 1 m
RESET PER AVVIO
}
6.2 Application pressure booster
MOTORE 1 AUTOM.
13.2 A 0h
MOTORE 1 STOP
0.0 A 0h
6.1
MOTORE 2 AUTOM.
13.2 A 0h
MOTORE 2 STOP
0.0 A 0h
MOTORE 1 MANUALE
13.2 A 0h
MOTORE 2 MANUALE
13.2 A 0h
MANCANZA ACQUA
ATTESA
RIEMPIMENTO
MOTORE 3 AUTOM.
13.2 A 0h
MOTORE 3 STOP
0.0 A 0h
MOTORE 3 MANUALE
13.2 A 0h
IF THE MOTHERBOARD
DETECTS A DRY
RUNNING CONDITION IT
WILL BE POSSIBLE TO
DISPLAY A FOURTH
SCREEN
PRESS. ST1:OFF
ST2:OFF EME:OFF
START 1 ON: ENABLES THE FIRST MOTOR
START 1 OFF: DISABLES THE FIRST MOTOR
START 2 ON: ENABLES THE SECOND MOTOR
START 2 OFF: DISABLES THE SECOND MOTOR
EMERG.ON: ENABLES THE THIRD MOTOR
EMERG.OFF: DISABLES THE THIRD MOTOR