Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
15
Fig.12 Connection steps diagram
2. If the connection fails as Fig.13, please check whether the COM port is correct and then refresh and re-connect
it.
Fig.13 Connection error
Note that: users can search the COM port at
“
My Computer/Property/Device Manager/COM and LPT
”
.
5.4.2 Parameters configuration
1. Choose the reference mode “Internal” or “External”.
(a) If choose “Internal”, users can change the internal reference frequency by filling in the blank
or pull
the progress bar in Fig.14.
Fig.14 Parameter configuration diagram
(b) If choose “External”, users can not decide the external reference frequency. But
“
External
”
shows the current
external reference frequency at real time.
2. Choose the blade type, such as OE1B10.
