Tel: 886. 909 602 109 Email: [email protected]
www.salukitec.com
13
(c) If the installation is over, then Fig.9 will occur. Press [enter] key to finish it.
Fig.9 USB driver installation process completed
Note that:
1. If the PC is online, the PC will search a proper driver and install it online automatically when the PC is
connected with the SE3001 through USB.
2. If the PC has installed the
“
FT232_driver.exe
”
, you can skip this step.
3. If the installation fails, please use
“
Inf installation file
”
to install the driver again.
5.2 Installing the Software Drivers
If the PC hasn’t installed NI LabView 2011 or a higher version and a corresponding VISA driver, you
need to follow this step to install them all.
1. Open “Console Drivers” folder and its files are as below:
Fig.10 Console Drivers folder
