Saluki S2106 Series User Manual Download

Page: 8 / 60

can be cleaned by wiping with soft fabric.

Tip:

Do not press the LCD screen with sharp objects or wipe the LCD screen with organic solvents,

otherwise the LCD screen may be damaged.

In the process of using the instrument, without permission, users are strictly forbidden to dismantle the

machine without permission, otherwise they will lose the warranty qualification!

Except for 1625nm/1650nm wave, other waves can not be tested with light (on-line test). Forced use

will burn out the internal components of the instrument, leading to instrument failure! (the failure
caused by this operation is not covered by the warranty)

1.4 Instrument Maintenance

The

whole

machine

guaranteed

for

months,

and

the

consumable

parts

battery

and

optical

interface

are

guaranteed

for

months.

The

items

given

with

the

products

are

not

covered

this

warranty.

If you have

any problems, please send an email to [email protected].

Summary of Contents for S2106 Series





























































Search results

Summary of Contents for S2106 Series

Reviews:

Related manuals for S2106 Series

Brands by name

Popular brands

Saluki S2106 Series, User Manual

Search results

Summary of Contents for S2106 Series

Reviews:

Related manuals for S2106 Series

Brands by name

Popular brands