Tel: 886.2.2175 2930 Email: [email protected]
12
3.2
Routine Maintenance
It is required to check and clean the instrument after a period of use. Please proceed as the following procedures:
1)
Shut down.
2)
Unplug the power cord.
3)
Use a clean and soft cloth with detergent to wipe the keys gently.
4)
Wipe up the display with a clean and soft cloth.
5)
Check other sides of the instrument and ensure no damage
6)
Clean other sides of the instrument with a soft cloth. Please pay attention to the ports and interfaces, do not clean them
and avoid any scratches which may impact the measurement in future.
7)
Plug in the power cord after the display is dried out.
There is a layer of Anti Static Coatings (ASC) applied on the surface of the display screen, so
never use the cleaner containing fluoride, acidic cleaner or alkali cleaner. Never spray cleaner
over the display panel, otherwise the cleaner may seep into and damage the instrument.
