background image

TROUBLESHOOTING

You can solve many common appliance problems easily. Try the suggestions
below to see if you can solve the problem on your own.

8

PROBLEM

POSSIBLE CAUSE

Appliance does not operate.

• Not plugged in.
• The circuit breaker tripped or a blown fuse.

Appliance is not cold enough.

• Check the temperature control setting.
• The door is opened too often.
• The door is not closed completely.
• The door gasket does not seal properly.
• Appliance is too close to a wall.

Appliance too cold.

• Check temperature setting.
• The room temperature is too cold.

Turns on and off frequently.

• The room temperature is hotter than normal.
• The door is opened too often.
• The door is not closed completely.
• The temperature control is not set correctly.
• The door gasket does not seal properly.

Vibrations.

• Check to assure that the appliance is level.

(See ‘Installation’ section).

The appliance seems to make too
much noise.

• The rattling noise may come from the flow of the 

refrigerant, which is normal.

• As each cycle ends, you may hear gurgling sounds 

caused by the flow of refrigerant in your appliance.

• Contraction and expansion of the inside walls may 

cause popping and crackling noises.

• The appliance is not level. (See ‘Installation’ section).
• Make sure the contents are not touching and are 

placed correctly on the shelves.

Condensation on front of door.

• Room environment is too humid.

Moisture on exterior of appliance.

• Normal during periods of high humidity – wipe dry.

The door will not close properly.

• The appliance is not level. (See ‘Installation’ section).
• The door was reversed and not properly installed.
• The gasket is dirty.
• The shelves are out of position.

Ice formation on the inner rear wall. • The door gasket does not seal properly.

• The door is opened too often or for too long.

SAL7-578 Booklet Salton Wine Cooler WC-2036_EN V2.qxd  02/08/07  16:44  Page 8

Summary of Contents for WC-2036










Reviews: