HOW TO USE
Setting the temperature
1. Plug in the Wine Cellar.
2. The temperature of the cellar is controlled by the temperature up (
p
)
and temperature down (
q
) buttons. Press either of their buttons to
increase or decrease the preferred temperature in increments of one
degree. The temperature can be set anywhere between 7°C to 18°C
(45°F to 64°F).
3. The temperature displayed on the control panel is always the actual interior
temperature of the wine cellar. After inputting a desired temperature setting,
the display will indicate the desired temperature then switch back to the
actual interior temperature in approximately 3 seconds.
4. The wine cellar then will work towards the desired temperature.
NOTE:
The LCD background light will turn on when any of the 3 buttons are
press and turn off 1 minute after the last button is pressed.
NOTE:
The interior temperature can be set to between 7°C (45°F) and 18°C (64°F).
The wine cellar has the ability to maintain a temperature that is 18°C (32°F)
cooler than the ambient temperature. Therefore, if the ambient temperature is
higher than 36°C (97°F), the wine cellar may not be able to reach the desired
interior temperature.
R
ecommended temperatures:
Red wines
12 - 18°C (54 - 64°F)
Port / Sherry
10 - 14°C (50 - 57°F)
White / Rose wines
8 - 12°C (46 - 54°F)
CARE AND CLEANING
•
Always unplug the wine cellar before cleaning.
•
Wash the interior with a warm water and baking soda solution 2 tbsp.
(30 ml) of baking soda to 1 quart (litre) of water.
•
Wash the wine racks with water and a mild detergent.
5
SAL7-575 Booklet Salton Wine Cooler WC-2033_EN VF.qxd 01/08/07 16:53 Page 5