PARTS DIAGRAM
A
Temperature control button
B
Burst of steam button
C
Spray button
D
Steam control knob
E
Effusion lid
F
Spray nozzle
G
Soleplate
H
Water tank
I
Pilot light
J
Power cord sleeve
RECOMMENDATIONS
If the water in your area is particularly hard, it is recommended that distilled water is used to fill your
steam iron.
Once you have finished using your iron, turn the steam knob to the off position.
WARNING
1.
Do not leave the iron unattended while in use.
2.
When filling the iron with water or pouring out remaining water, first unplug the unit from the
wall-socket.
3.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
USAGE INSTRUCTIONS
Remove any protection film from the soleplate before first use
Temperature control
Stand the steam iron upright and select the desired temperature using the temperature control button. Pay
attention to the symbols on the dial for the different textiles:
.
NYLON/ACRYLIC/ACETATE
