6
1.
Select the type of massage that you prefer by using the dial on the control panel:
a.
Dry Massage: The foot spa may be used without water to simply massage your
feet.
b.
Wet Massage: To enjoy a wet massage, fill the foot spa with
warm
water up to
the “Max” line indicated on the inside wall of the unit
2.
Plug in the appliance at the mains socket and switch on.
3.
Select your preferred function/application:
a.
Position 0:
Switches unit OFF
b.
Position 1:
Massage ONLY
c.
Position 2:
Massage and Heat
d.
Position 3:
Heat ONLY
4.
Sit down in a comfortable chair and place your feet into the Foot Spa.
5.
The roller ball in the centre of the unit can be utilised to provide more precise stimulation
to the sole of the foot.
6.
Enjoy the massage. Enhance your massage experience by using the roller ball or the
therapeutic nodes along the entire base of the massager.
7.
Upon completion of the massage, switch the unit OFF at the controls and unplug from the
mains.
8.
Dry your feet.
9.
Empty the container into the basin/bath by tilting the unit and allowing the water to flow
out over the drain spout.
10.
Never allow the water to run over the control dial.
Note
: The heater will only maintain the temperature of the water poured into the foot spa at the
onset. It will not heat cold water.
To ensure a warm massage, please fill the unit with warm
water
.
CARE AND MAINTENANCE
This appliance is for household use only and is not user-serviceable.
Unplug the unit and allow it to cool down before cleaning.
To clean the appliance, simply rinse it out with clean water.
Never immerse the entire unit in water or any other liquids
