5. Plug into a 120V AC wall outlet. The display will show the actual water
temperature. The Kettle is now in standby mode.
NOTE: If no selection has been made in 5 minutes, the display will
shut off and the Kettle will enter Sleep Mode. Press any button once
to “Wake up” the Kettle.
NOTE: Never plug kettle into an electrical outlet when the kettle is
empty.
6. Direct kettle spout away from cabinets, walls, etc. to prevent possible
steam damage.
7. The default temperature is 100°C (212°F). The variable temperature
range is 40 to 100°C (105 - 212°F) in 10 degree Celsius increments.
8. To boil water:
- Press the power button once.The kettle will beep.
- The display will show 100°C (212°F) . The power indicator light on
the knob will illuminate red to indicate the kettle is actively heating.
The display temperature will increase until the kettle reaches 100°C
(212°F).
- Once the water has boiled the Kettle will shut off and the kettle will
beep two times.
- The display will show will show the decreasing water temperature as
it cools.
9. To use the variable temperature settings:
- Press the power button once and the display will show 100°C.
- Turn the knob clockwise or counter-clockwise to adjust the variable
temperature between 40 - 100°C (104 - 212°F). The temperature
will flash twice before switching back to the actual temperature of the
water. Press the power button once to start the kettle. The display
will flash again the desired temperature setting before switching back
to the actual temperature of the water. The power indictor light on the
knob will illuminate red to indicate the kettle is actively heating.
NOTE: The temperature of the water shown on the display will
increase or decrease as the water is being heated or cooling. This is
normal.
- The display will show the chosen temperature for 3 seconds then
will shut switch to the actual water temperature. The display
temperature will increase until it reaches the chosen temperature.
- Once the water has reached the set temperature the Kettle
will shut off and beep two times, the display will show the deceasing
water temperature as it cools.
10.IMPORTANT:
a) The kettle shuts off automatically after the boiling cycle is complete.
b) If the kettle is removed from the base before the boiling cycle is
complete the boiling cycle will be cancelled.
c) To turn the kettle off before the boiling cycle is complete press the
Power Button.
4
