Installing the Filter:
Hold the Filter by the top edge and insert the Filter Hook on the bottom
edge of the spout on the inside of the kettle. Press the Tab against the
top edge of the spout until you hear a click.
IMPORTANT: Do not remove or install the Filter when the Kettle is
hot.
CARE AND CLEANING
1. All servicing, other than cleaning, should be performed by an
authorized service representative. See Warranty section.
2. Unplug Kettle from wall outlet. Empty the Kettle and allow it to cool
before cleaning.
1. Exterior
- Use a soft, damp cloth to clean the exterior.
-
DO NOT use abrasive cleaners. Dry exterior thoroughly before use.
-
DO NOT immerse kettle or power base in water or other liquid.
2. Descaling
Under normal use, scale build-up will form on the inside of the Kettle
and will coat the stainless steel plate. Scale, which has accumulated
inside the Kettle must be removed.
1. Boil equal parts of white vinegar and water. (500 ml / 2 cups of each
is recommended)
2. Once the water has boiled, allow the mixture to stand several hours or
overnight.
3. Empty out the mixture and fill the Kettle to the MAX level with fresh
water.
4. Bring water to a boil and discard.
5. For heavier scale build-up, use pure vinegar, boil, then let stand
overnight.
6. Empty out vinegar and fill the Kettle to the MAX level with fresh water.
7. Bring water to a boil and discard.
8. For the heaviest scale build-up use a scale/lime remover and follow
the manufacturer’s instructions.
NOTE:
1. Scale build-up can be reduced by pouring out water after Kettle use
then refilling the Kettle when required.
2. The descaling process should be repeated periodically.
5
