16.Do not use Kettle without the Lid in place.
17.Scalding may occur if the Lid is opened while the Kettle is hot.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug
(2 blades and 1 pin). If the plug does not fit fully into the electrical outlet
contact a qualified electrician. Do not modify the plug in any way or use
an adaptor.
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Water boiled for the first time should be discarded.
4. The Aquascreen® filter has been installed in the spout of the Kettle
during production. If it has been dislodged during shipping check
inside the Kettle or in the box for the Filter. Install the Filter before
using the Kettle.
IMPORTANT NOTES:
• DO NOT remove or install the filter when the Kettle is hot.
• DO NOT use the kettle without the filter in position:
- This may allow water to spit out when boiling
- The kettle may remain in the boil cycle too long once the water
has boiled
- The kettle may not shut off
HOW TO USE
1. Open the Lid by pressing the oval button at the top of the handle.
Fill the kettle through the lid opening with a minimum of 2 cups
(500 ml) of water.
2. DO NOT attempt to fill the Kettle while it is plugged into the wall outlet.
DO NOT use for other than boiling water. Other liquids will
contaminate the interior of the kettle.
DO NOT fill past the MAX level indicated in the water level window.
Overfilling may cause water to spit out when boiling.
3. Close the Lid. Ensure that it snaps tightly into place.
3