TROUBLESHOOTING
Problem
Solution
Juicer will not operate
when switched on.
•The safety locking arm may not be
correctly engaged into the 2 grooves
on either side of the Pulp
Chute/Juicer Cover.
•The safety foot is not fully inserted
in the slot in the Motor Housing.
Motor stalls when juicing
•Push the Food Pusher down slowly
so that wet pulp does not build up
under the Pulp Chute/Juicer Cover.
•Choose Hi speed instead of Lo speed.
Excess pulp building up in filter
•Alternate soft and hard fruit
and vegetables
Pulp too wet
•Use Lo speed.
•Check to be sure that the holes in
the mesh filter are not blocked. If
they are blocked follow #5 in the
How to Clean section.
Juice leaks between the rim of the
Juicer and Pulp Chute/Juicer Cover
•Use Lo speed. Fruits and vegetables
with a high water content should be
juiced on Lo speed.
10
