5. Due to fast freezing, ice cubes may appear cloudy. This is trapped air
in the water and it will not affect the quality or taste of the ice.
CARE AND CLEANING
1. Stop the Ice Making Cycle by pressing the Power Button. Unplug the Ice
Maker from the wall outlet. Allow the unit to warm up to room temperature.
2. If the Water Tray is not in the vertical position behind the Evaporator
Fingers, gently push the Water Tray back so that all water drains into
the Water Reservoir.
3. Open the Drain Plug and remove the Silicone Stopper to drain out excess
water. Replace the Silicone Stopped and Drain Plug.
4. Remove the Ice Basket.
5. Clean the Ice Maker interior with a soft cloth dampened in warm water
and vinegar. Rinse with a clean damp cloth.
6. Wash the Ice Basket and Ice Scoop in warm soapy water. Rinse and dry.
7. Clean the exterior of the Ice Maker with a soft damp cloth. Use a mild
dishwashing soap, if necessary.
8. The Water Filter inside the Water Inlet Tube should be clean periodically
(See illustration 1). Place your finger about 1/2” into the Water Inlet
Tube. The Water Filter will stick to your finger and can
be pulled out. Rinse the Water Filter under clean
running water. If necessary, clean with a soft brush.
Replace the Water Filter.
9.
IMPORTANT NOTE:
Do not clean the Evaporator Fingers
6
Ill. 1
Water Inlet
Tube
Water
Filter
SAL6-505 Booklet Salton Ice Maker IM-2010_EN_VF.qxd 27/09/06 15:37 Page 6
