5
7. The Kettle shuts off automatically and beeps twice when the cycle
is complete. The light on the temperature button will remain on until
you remove the Kettle from the Base.
NOTE: The Kettle will not beep when the boil cycle is complete if
the Keep Warm function is used. The Preset Temperature Button
will stop fl ashing when the boil cycle is complete.
8. To turn the Kettle off before the boiling cycle is complete, press the
On/Off Button. The lights will go out.
9. If you want to use the Kettle again after completing a boiling cycle,
allow the thermal safety switch to cool down for 15 – 20 seconds
then select desired temperature and press the On/Off Button.
NOTE: If the selected temperature does not fl ash and the light
around the On/Off Button does not come on, then the water is hot
enough to use without reheating.
10. IMPORTANT:
a. The Lid should never be opened when the Kettle is hot.
b. Always keep the Lid on when pouring water.
c. Only grip the Kettle by the Handle as all other surfaces will be
hot.
d. If the Kettle is accidently switched on when empty, the
thermostat will automatically cycle on and off to prevent the
Kettle from overheating. If this situation occurs, press the On/
Off switch and unplug the Kettle immediately. Let the Kettle cool
before refi lling.
e. DISCONNECT the Power Cord from the wall outlet when not in
use.
KEEP WARM FUNCTION
1. The Keep Warm function will keep water at the preset temperature
for 30 minutes. This feature is only available in the 70°, 80° and
90°C (160°, 175° and 195°F) temperature settings.
2. To use the Keep Warm function press the Keep Warm Button ( )
after you have selected a preset temperature and before you press
the On/Off Button.
3. The light on the Keep Warm Button will light up when this function
has been activated.
4. The Keep Warm function will remain active, even if the Kettle is
removed from the Base, for a maximum of 1 minute.
5. IMPORTANT: The Keep Warm Function cannot be used for the
100°C/212°F temperature.
HOW TO USE THE TEA STEEPER
1. Use this function with the Tea Infuser Assembly.
2. Remove the Tea Infuser Basket by holding the Tea Infuser Basket
Holder with one hand and turning the Basket counterclockwise.
GK1429_KettleBooklet_E.indd 5
GK1429_KettleBooklet_E.indd 5
14-02-19 9:10 AM
14-02-19 9:10 AM