4
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Gently wash the Tea Infuser Basket Holder and Basket.
4. Follow instructions in the How to Use the Kettle section below.
Water boiled for the fi rst time should be discarded.
HOW TO USE THE KETTLE
1. Place the Kettle on a fl at level surface close to a 120 volt A.C.
outlet.
2. Press the Kettle Lid
Release Button and
lift the Kettle Lid to
remove it from the
Kettle.
3. Fill the Kettle with water between the MIN and 1.7L/Q MAX marking.
DO NOT attempt to fi ll the Kettle while it is plugged into the wall
outlet. DO NOT use the Kettle for anything other than boiling water
or making tea. Other liquids will contaminate the interior of the
Kettle.
DO NOT fi ll past the MAX level indicated in the water level window.
Overfi lling may cause water to spit out when boiling.
4. Replace the Lid on the Kettle and gentle press the Lid Release
Button until it locks into place, fl ush with the Lid.
5. Place Kettle on the Base then plug into a 120V AC wall outlet.
NOTE:
- Never plug Kettle into an electrical outlet when the Kettle is empty.
- Direct Kettle Spout away from cabinets, walls, etc. to prevent
possible steam damage.
6. Press the Preset Temperature Button that corresponds to the water
temperature you desire. Press the On/Off Button to start the cycle.
The blue lights around the chosen Preset Temperature Button will
fl ash and the light around On/Off Button will light up and remain on.
To quick start the Kettle press the On/Off Button and the Kettle will
start the boil cycle at 100°C/212°F temperature.
NOTE: If you want to use the Keep Warm function follow the
directions in the Keep Warm section.
GK1429_KettleBooklet_E.indd 4
GK1429_KettleBooklet_E.indd 4
14-02-19 9:10 AM
14-02-19 9:10 AM