Important: Do not grate soft cheeses, nuts, vegetables, etc.
1. Cut cheese into cubes and remove the rind.
2. Put the cheese cubes into the Hopper.
3. Lower the Pusher
4. Holding the Grater with one hand,
depress the 'On/Off' Button.
5.
Hold the Grater slightly inclined to
facilitate delivery of grated food. (Ill. 2)
Grating Cylinders
2 Grating Cylinders are provided:
One Cylinder has 349 holes and is used
to obtain finely grated food.
The other Cylinder has 175 holes and is
used to obtain coarsely grated food.
To remove the Cylinder from the Grater slide
the Cylinder Release Button upwards and pull
the Cylinder out. (Ill. 3 & 4)
To install the Cylinder, slide the Release Button
upwards and push the Cylinder into the Grater,
as far as it will go.
N.B.: Make sure the tab is completely outside of
and does not obstruct the Cylinder (Ill. 5 & 6)
Recharging
The rechargeable Battery supplies energy to the appliance and must be
recharged periodically.
1. Pull the Battery out of its housing and insert it in the Charging Base, by sliding
the Positioning Lug into the Positioning Groove of the Charging Base.
2. Plug the Charging Adapter into a 120 volt AC electrical outlet. The Indicator
Light should come on.
Please note:
1. The Battery will be fully charged after 15 hours and 60% recharged after 6
hours.
