CARE AND CLEANING
1. Unplug cord from wall outlet. Allow oil to cool. NOTE: Oil retains its
temperature for a long time after use and could take 2 – 3 hours. Do
not attempt to empty the Fryer until the oil has cooled completely. Do
not move or carry the Fryer while it is still hot.
2. Once oil has cooled remove the Control Plate Assembly and place on
paper towels. IMPORTANT: Never immerse the Control Plate Assembly in
water. Wipe the Control Plate Assembly with a damp cloth or paper
towels. Dry thoroughly.
3. Remove the Fry Bowl and use the Pouring Spout to pour the oil into an
airtight container. If the oil is to be reused, strain the oil through a coffee
filter into the container. Seal the container and store in a cool dark place.
4. The Basket, Fry Bowl, Base and Cover can be washed in warm soapy
water or in the dishwasher. NOTE: The Basket should be placed on the
top rack of the dishwasher only.
5. When all parts are completely dry, reassemble the Fryer and store in a dry
location.
NOTE:
•
DO NOT IMMERSE CONTROL PLATE ASSEMBLY/HEATER TUBE, CORD OR
PLUG IN WATER OR ANY OTHER LIQUID.
•
DO NOT USE STEEL WOOL OR ABRASIVE CLEANERS ON ANY PART OF
YOUR APPLIANCE.
8
Booklet_DF-1114_ENG_R.qxd:Salton Booklet 12/23/09 3:35 PM Page 8
