1.Assemble the Grinding Bowl by aligning the arrows on the Bowl with the
arrows on the Base. Turn the Bowl clockwise until it locks into position.
2.Place the Inner Cover onto the Outer Cover.
3.Place the Cover Assembly onto the Grinding Bowl by aligning the
arrows on the Cover with the arrows on the Grinding Bowl. Turn the
Cover clockwise.
NOTE: The Coffee Grinder will only operate with the Cover and Grinding
Bowl in the locked position.
Power Cord
For packaging convenience the power cord may be wound underneath the
base. To extend the cord unwind it from the cord storage.
Cleaning
1.Unplug from the wall outlet.
2.Turn the Cover Assembly counterclockwise and remove.
3.Separate the Inner and Outer Cover.
4.Turn the Grinding Bowl counterclockwise and remove.
5.Use the included cleaning brush to gently brush away any excess coffee
grounds from the walls or bottom of the Grinding Bowl.
6.Wash the Cover and Bowl in warm soapy water. Rinse and dry
thoroughly.
NOTE: Do not place any parts of the appliance in the dishwasher.
IMPORTANT: Be careful when wiping out the Grinding Bowl, the
blade is very sharp.
7.If needed, wipe the outside of the appliance with a cloth dampened in
warm soapy water. Ensure that water or any other liquids do not spill
or drip on the Base. NEVER poke with anything into the Base. If
necessary, use the included cleaning brush to clean the top of the Base.
If water enters the Base, have the unit checked by an authorized service
center. (See warranty) NOTE: Do not use abrasives.
7
