4
HOW TO USE
1. Place the Grinding Bowl and the Cover Assembly on the Grinder. See
the assembly instructions in the Care and Cleaning section.
NOTE: The Coffee Grinder will only operate with the Cover and
Grinding Bowl in the locked position.
2. Remove the Inner Cover by grabbing it by the finger tabs and lifting it
straight up.
3. Ensure that the Grinding Bowl is empty and clean then pour whole
coffee beans into the Grinding Bowl and fill to the desired amount.
The minimum capacity is ¼ cup (60 ml) of coffee beans and maximum
capacity ¾ cup (180 ml).
NOTE: NEVER fill above the MAX level.
4. Place the Inner Cover back onto the Grinder.
5. Plug the Grinder into the wall outlet.
6. Press the Selection Buttons to choose the desired number of cups and
desired grind.
7. Press and HOLD the Start Button to begin grinding. The Grinder will
stop automatically when the grinding cycle is complete.
NOTE: To stop the grinding cycle at any time, release the Start
Button. If the Start
Button is pressed again, the Grinder will start from the beginning of the
timed cycle.
IMPORTANT: NEVER remove the Cover until the blades have
stopped moving.
8. Remove the Grinding Bowl and Cover Assembly together by turning
the Grinding Bowl counterclockwise and lifting it straight up.
9. Use the Cleaning System by gently twisting the Cover back and forth
to remove the coffee grounds from the sides and bottom of the
Grinding Bowl.
10.Remove the Inner Cover and shake out the coffee grounds.
11.Use the ground coffee immediately or place in an airtight container
for storage.
GRIND SELECTOR CONTROL
The Grind Selector Control has 3 settings, fine medium and coarse.
The setting that you choose will influence the strength of coffee.
• Fine:
Use for turkish coffee, espresso, latte, macchiato and
cappuccino
• Medium:
Use for french press coffee makers and filter coffee
makers
• Coarse:
Use for percolators
