OWNER’S MANUAL V. 1 ENGLISH
PT-298 STR TREADMILL
This manual is available at
www.salter.es
9
ENGLISH
STEP 4: To adjust the Incline level, pressed and hold the I /– or Up/Down keys; you may also adjust to the
desired incline by pressing the Quick Incline key and then 0 through 9.
STEP 5: To stop the tread-belt press and release the Stop key.
5.1.2 PAUSE/STOP/RESET FEATURE
STEP 1: When the treadmill is running the pause feature may be utilized by pressing the red Stop key once. This will
slowly decelerate the tread-belt to a stop. The incline will go to zero percent. The Time, Distance and Calorie
readings will hold while the unit is in the pause mode. After 5 minutes the display will reset and return to the start
up screen.
STEP 2: To resume your exercise, when in Pause mode, press the Start key. The speed and incline will return to their
previous settings.
- Pause is executed when the Stop button is pressed once. If the Stop key is pressed a second time, the program will
end and a workout summary will be displayed. If the Stop button is pressed a third time, the console will return to
the idle mode (start up) screen. If the Stop button is held down for more than 3 seconds the console will reset.
5.1.3 INCLINE FEATURE
- Incline may be adjusted anytime after belt movement.
- Press and hold the + / - or Up/Down keys (console or hand rail) to achieve desired level of effort. You may also
choose a more rapid increase / decrease by selecting the Quick Incline key, then 0 through 9, on the left hand side of
console.
- The display will indicate incline percent in increments of .5 as adjustments are made.
- The incline will return to zero unless the main power switch or safety key are turned off while incline is at a higher
setting.
5.1.4 DOT MATRIX CENTER DISPLAY (Manual Operation)
Eighteen columns of boxes (8 high) indicate each segment of a workout. The boxes only show an approximate level
(speed/incline) of effort. In Manual Operation the Speed / Incline dot matrix window will build a profile “picture” as
values are changed during a workout.
The speed and incline profiles will display half of the program at one time (9 columns). They will both scroll right to
left. The Lap track will move in a counterclockwise direction.
5.1.5 0.4 KM TRACK
The 0.4 km track (one lap) will be displayed around the dot matrix window. The flashing segment indicates your
progress. Once the 0.4 KM track is complete this feature will begin again. There is a lap counter in the message
window for monitoring your distance.
5.1.6 PULSE GRIP FEATURE
The Pulse (Heart Rate) console window will display your current heart rate in beats per minute during the workout.
You must use both stainless steel sensors on the front cross bar or the heart rate transmitter chest strap to display
your pulse. Pulse value displays anytime the upper display is receiving a Pulse signal. You may not use the Grip Pulse
feature while in Heart Rate programs.
5.1.7 CALORIE DISPLAY
Displays the cumulative calories burned at any given time during your workout.
Note: This is only a rough guide used for comparison of different exercise sessions,
which cannot be used for medical
purposes.